Integra Pool Service Logo
Contact Us

AstralPool E-Series · Single-speed pool pump

AstralPool E-Series. Straightforward pumping for everyday pool filtration.

A simple fixed-speed option for suitable small-to-medium pool systems and replacement jobs. Choose from E140, E170 and E230, with Integra checking the required flow, filter and plumbing before confirming the model.

Add to QuoteCompare models ↓

Supplied, matched and installed across Newcastle, Lake Macquarie, Maitland and surrounding Integra service areas.

AstralPool E-Series single-speed pool pump supplied by Integra Pool Service
E-SeriesE140 · E170 · E230
E140 · E170 · E230Three single-speed models
140–230 L/minPublished flow @ 8m head
57 dBAPublished noise @ 1m
2 yearsCurrent AstralPool pump warranty*

Where this pump fits

Simple filtration for the right pool system.

E-Series suits straightforward circulation duties where adjustable speed is not required. AstralPool positions the range for pools up to 60,000 litres; actual suitability depends on the plumbing, filter and connected equipment, not pool volume alone.

Single-speed operationOne operating speed, with the model matched to the required circulation duty.
Three model sizesE140, E170 and E230 provide different flow outputs for replacement matching.
Routine filtrationA practical option for suitable residential systems with modest hydraulic demands.
Replacement supportWe check the existing pump, unions and equipment layout before ordering.
Best use

Good fit when

Your pool needs straightforward single-speed filtration.
The required flow sits within the selected model’s performance range.
You want a replacement assessed against the existing equipment.
Before ordering

Check carefully when

The filter or pipework limits the flow the system can accept.
Spa jets, heating or cleaning equipment create higher flow or pressure demands.
You want adjustable speed or lower-speed filtration; compare a variable-speed option.

Model range

Three E-Series models. Match the flow to the system.

E140, E170 and E230 have different outputs. A larger model is not automatically a better replacement: the filter and system duty determine the right choice.

Swipe to compare models →

ModelInputFlow @ 8mFull-load ampsNoise @ 1mSupply
E140650W140 L/min2.9A57 dBA240V single phase
E170850W170 L/min3.5A57 dBA240V single phase
E230925W230 L/min3.9A57 dBA240V single phase

Current Australian manufacturer specifications. Flow is quoted at 8m head; installed flow depends on system resistance. Noise is the published figure at 1m, not a guarantee for every equipment location.

Manufacturer brochure ↗
Not sure this is the right pump?Send us a photo before you choose.A clear pump label plus one wide photo of the equipment area is usually enough for us to narrow down the correct replacement range.
Send us a photoCall 0466 632 036

Installation & replacement

A straightforward pump still needs the right installation.

We check the system flow requirement, physical fit and electrical supply before selecting an E-Series. Correct priming, sound suction plumbing and access for routine maintenance all matter on a replacement job.

01Filter limitMaximum permitted filter flow remains a hard system limit.
02Connected equipmentChlorinator, heater and cleaner flow requirements must be met.
03Priming & suctionPump location, suction condition and air leaks affect reliable priming.
04Physical & electrical fitConfirm unions, footprint, service access and suitable 240V single-phase supply.

Warranty & documents

Current product support at a glance.

Warranty eligibility and manufacturer terms can change. We confirm the current conditions with the selected model at purchase and keep the relevant product documents available here.

2 yearsPump warrantyResidential pump coverage is 2 years, with the mechanical seal limited to 1 year. Subject to AstralPool’s current terms and exclusions. Read warranty conditions ↗
Product informationE-Series brochure

E140C, E170C and E230C specifications and performance curves. The current product page uses a 60,000L guide; this older brochure states 100,000L.

Open PDF ↗Installation & supportInstallation & operating manual

Installation, operation and maintenance for CTX, E, FX and XP-Series pumps.

Open PDF ↗

Replacement & quote

Let us match the E-Series to your existing equipment.

Send us the pump label and a wider equipment photo. We can assess whether E-Series suits the job and confirm E140, E170 or E230 before ordering.

Not sure? Send us a photo →
01Current pumpModel and rating plate.
02FilterModel and maximum design flow.
03Connected equipmentChlorinator, heater, cleaner and any spa functions.
04PipeworkSuction/return sizes and equipment-pad layout.
Matched before it is ordered. We use the photos and system details above to check the likely hydraulic duty, physical fit and connected equipment before confirming the model.

E-Series FAQ

Questions worth answering before the pump is ordered.

Pump selection is mostly a hydraulic and system-matching decision. These are the questions that matter most on real replacement jobs.

Not sure this is the right pump?A clear photo of the pump label and one wider photo of the equipment area is usually enough for us to start.
What is the difference between E140, E170 and E230?
Their published flow at 8m head is 140, 170 and 230 L/min respectively, with input power of 650, 850 and 925W. Integra matches the model to the required flow and equipment limits.
Is E-Series a variable-speed pump?
No. E-Series runs at one operating speed. If adjustable-speed filtration is a priority, ask Integra to compare suitable variable-speed pumps.
Can E-Series replace my existing pool pump?
It may be suitable, but the filter, required flow, suction plumbing, unions and available space need checking. Send a pump-label photo and a wider equipment photo.
What size pool is E-Series suitable for?
AstralPool’s current product page positions E-Series for small-to-medium pools up to 60,000 litres. This is a guide; hydraulic duty and connected equipment determine suitability.
How long is the warranty?
The current residential warranty is 2 years for the E-Series pump, with mechanical-seal coverage limited to 1 year, subject to AstralPool’s full warranty conditions.

Integra Pool Service · Argenton

Pool pump supply, installation and support from a local equipment team.

Integra can help with E-Series replacement matching, installation and ongoing pool-equipment support across Newcastle, Lake Macquarie and Maitland. You can also visit our Argenton pool shop for equipment advice.

← Back to pool pumps